Lanaform Power New Tech Manual De Instrucciones página 6

CONTROLS
EN
A. Time display
B. Mode display
C. Speed display
a. On/Off button: Switch on the power supply and
press this button; the unit will start to operate. Press
the button a second time and the unit will shut
down.
b. Mode button: There are four different modes:
888, P1, P2 and P3. 888 is the manual mode. This
function allows you to set the speed and the time
yourself. P1, P2 and P3 are automatic modes in
which the speed and time are pre-programmed. In
these modes, the time button and the speed button are deactivated.
c. Time button: Press this button to set the time. Each press adds one minute. The display rolls back to 1 when 10 has
been reached.
d. Reset button: This resets all the programmes to their initial status.
e. Fast button: Press this button to increase the speed.
f. Slow button: Press this button to decrease the speed.
OPERATING INSTRUCTIONS
1. Connect the unit to the power supply and press the On/Off button. The unit will start to operate. If you press the
button a second time, the unit will return to the standby mode.
2. Please read the "Controls" chapter for full details of the various functions available.
3. If you want to use the unit in the "upright" position, stand on the unit before switching it on.
4. If you prefer another position, it is better to ask another person to help you operate the controls, or to start "upright"
and then change position.
5. For both your health and your safety, do not use the unit for more than 20 minutes per séance to avoid overstressing
your body.
DISPLAYS
Speed: 1 > 16
Time: from 1 to 10 minutes (initial setting: 10 minutes)
Mode: 888, P1, P2, P3 (Initial mode: 888)
MODES
888 Manual mode
In this mode, you can adjust the speed yourself, settings 1, 2, 3, 4, ......16.
P1 Programme 1
The speed changes cyclically. It starts at level 1 and increases successively by one level until level 16 is
reached. Then the level of intensity decreases by one level until level 1 is reached. The cycle then starts all
over again.
6