ENGLISH
PERFORMANCE
•
Installable in Sinthesi frames.
•
17 user terminal pins, that can be directly connected to the buttons and an already connected call
button.
•
Connector for 16 user expansion module 1083/17.
•
Maximum four expansion modules (connected in series) for maximum 8 user buttons in each door
unit.
•
Possibility of assigning alphanumeric call button code with letter prefix or suffix A-J.
•
The digitiser is programmed by means of an external programming device 1072/60 which in turn must
be connected to a push-button panel 103/65.
•
Simplified programming with LED button and two dip-switches in simple systems.
•
Possibility of programming one or more buttons for controlling a special decoder ("staircase lights"
function).
•
Electrical relay load control actuator with NC-C-NO outputs and programmable activation time, from
1 to 30 s.
•
Programmable door phone hang-up waiting time (10, 20, 30, 40 s).
•
Programmable minimum guaranteed conversation time (10, 0, 30, 40 s).
•
Maximum conversation time: 50s.
•
Open door contact input.
•
Hall button timed input.
•
Acoustic call sent signal.
•
Busy function signalled by busy tone when a button is pressed to busy time-out.
•
Two trimmers for adjusting speaker and microphone volume.
•
Opto-isolated control signal management for video door phone systems.
•
Possibility of programming a pre-set button for direct switchboard calls (day state only).
•
Management of audio repeater device for hard of hearing people and module with voice messages and
leds.
STRUCTURE
default
1. Speaker volume adjustment trimmer.
2. Microphone volume adjustment trimmer.
3. Simplified programming LED button.
4. Programming connector for adapter 107/60
and keyboard 1032/65.
5. Simplified programming dip-switch.
6. Already connected call button
7. Terminal board for system connection.
1
1
2
8
3
7
4
5
6
8. Connector (I2C) for module with voice messages
and led Ref.1148/47.
9. Connector (ILA) for hard of hearing device Ref.
1148/48.
10. Connector (EXP) for 16 user expansion modules
Ref. 1083/17.
11. Terminal board for connecting buttons.
9
10
DS107-034
11