Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CAMERA MENU Organization
ZOOM SPEED : Use [Left, Right] key in the ZOOM SPEED menu to set the speed
as follows.
E
ZOOM SPEED 1 : About 17Sec. from X 1 to X 12(Slowest)
ZOOM SPEED 2 : About 10Sec. from X 1 to X 12(Slow)
ZOOM SPEED 3 : About 6Sec. from X 1 to X 12(Fast)
ZOOM SPEED 4 : About 3Sec. from X 1 to X 12(Fastest)
D-ZOOM : Sets up the Digital Zoom magnification ratio up to x10.
RS-485 : Sets up RS-485 Communication Protocol, Address, and Baud Rate.
(OTHER SET)
LANGUAGE
ENGLISH
ZOOM SPEED
1
DIGITAL ZOOM
OFF
RS-485
...
SYSTEM INFO
...
V-SYNC
INT
DISPLAY ZOOM
ON
RET
SYSTEM INFO :You can confirm settings related to the RS-485 communication,
product serial number, and the software version.
46
(RS-485)
PRESS THE
PROTOCOL
SAMSUNG
BAUD RATE
9600
ENTER
ADDRESS
0
BUTTON.
RET
(OTHER SET)
LANGUAGE
ENGLISH
ZOOM SPEED
1
DIGITAL ZOOM
OFF
RS-485
...
PRESS THE
SYSTEM INFO
...
ENTER
V-SYNC
INT
DISPLAY ZOOM
ON
BUTTON.
RET
V-SYNC : INT shall be selected to use internal synchronization. LINE... is used to
synchronize several camera phases for the multi camera operation by using
an external signal(AC signal). As there may be a slight deviation between
sets, adjusts PHASE to overcome this handicap. When you use AC power
source, V-SYNC is available. Select LINE... and press [ENTER] and the
PHASE control submenu will appear. The PHASE control ranges
from -106H to +106H as for NTSC and from -138H to +138H as for PAL.
(OTHER SET)
LANGUAGE
ENGLISH
ZOOM SPEED
1
DIGITAL ZOOM
OFF
RS-485
...
PRESS THE
SYSTEM INFO
...
V-SYNC
LINE...
ENTER
DISPLAY ZOOM
ON
BUTTON.
RET
When a DC power is supplied, V-SYNC menu will be displayed as --- and
you cannot make any settings.
(SYSTEM INFO)
ROM VER
0.207
EEP VER
0.208
PROTOCOL
SAMSUNG
ADDRESS
0
TYPE
RS-485, HALF
E
BAUD RATE
9600
SERIAL NO
000000000000000
RET
(LINE LOCK)
PHASE
(-308)I--------
RET
47
Capítulos
Tabla de contenido
