Camera Menu Organization; Camera Id; Iris - Samsung SCC-C9302P Guia Del Usuario

CAMERA MENU Organization

CAMERA ID

In the CAMERA ID menu, you may designate the CAMERA ID to be displayed in the monitor
connected to a camera. Set the CAMERA ID menu to ON... and press [ENTER] and the
CAMERA ID setup submenu will appear.The CAMERA ID may be created by up to 20 digits by
E
using alphabets, numbers, and some special texts served by the submenu screen. You may
locate the designated CAMERA ID on your own by using the LOCATION... submenu.
CAMERA ID ON...

IRIS

ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE ONEAF
ALARM SET ...
COLOR/BW COLOR...
PRIVACY ON...
SPECIAL ...
PRESET ...
EXIT QUIT
IRIS
ALC
Select ALC... from the IRIS menu and press [ENTER] and the BLC(Back Light
Compensation) setup submenu will appear. If you use a general camera to photograph a
subject under backlight or bright illumination, the subject will be shown dark on the monitor
due to the backlight. BLC(Back Light Compensation) is used to prevent such a backlight
problem to secure distinct images under bright illumination. Using the [Left, Right] keys, you
can set up BOTTOM..., TOP..., LEFT..., RIGHT..., CENTER... 5 preset areas and the
USER...function that can directly set the areas. For example, for the items in the BLC
menu, you can confirm the preset BOTTOM area by pressing [ENTER] key in the
BOTTOM... status.
28
(CAMERA)
A B C D E F G H I J K L
M N O P Q R S T U V W X
Y Z 0 1 2 3 4 5 6 7 8 9
: ! - + * ( ) /
PRESS THE
❿ ❿ ➛ ➛
SP SP
ENTER
LOCATION...
BUTTON.
RET
WDR.ZOOM.CAMERA.....
CAMERA ID ON...
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE ONEAF
ALARM SET ...
PRESS THE
COLOR/BW COLOR...
ENTER
PRIVACY ON...
BUTTON.
SPECIAL ...
PRESET ...
EXIT QUIT
(IRIS/ALC)
PRESS THE
BLC BOTTOM...
ENTER
LEVEL (0) ----I----
BUTTON.
RET
BLC
For items in the BLC menu, the user can set the size and location of the BLC area by
pressing [ENTER] key after put the cursor on USER... using the [Left, Right] key. For SIZE
items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press
the [ENTER] key.You can set the location for areas using the [Up, Down, Left, Right] key in
the LOCATION.
(IRIS/ALC)
E
BLC OFF
LEVEL (0) ----I----
RET
29