Delivery Inspection; Customer Service - Alliance Laundry Systems HC18 Instalación/Mantenimiento

Installation
Machine Overview
The polypropylene supply dispenser is
located under a flexible cover on the left side
of the machine, viewed from the front. The
compartments are numbered 1 – 3, starting
from the left side of the machine. A nozzle
flushes dry supplies from the compartment
with water at the appropriate time in the cycle.
Liquid supplies can be injected directly into
the dispenser compartments by a customer-
supplied external chemical supply system.
Hose barbs on the rear of the machine facilitate
connection to an external chemical supply
system. A terminal strip in the input power
junction box provides control signals.

Delivery Inspection

Upon delivery, visually inspect crate,
protective cover, and unit for any visible
shipping damage. If the crate, protective cover,
or unit are damaged or signs of possible
damage are evident, have the carrier note the
condition on the shipping papers before the
shipping receipt is signed, or advise the carrier
of the condition as soon as it is discovered.
Remove the crate and protective cover as soon
after delivery as possible. If any damage is
discovered upon removal of the crate and/or
protective cover, advise the carrier and file a
written claim immediately.
12
(Continued)

Customer Service

If literature or replacement parts are required,
contact the source from whom the machine
was purchased or contact Alliance Laundry
Systems LLC at (920) 748-3950 for the name
and address of the nearest authorized
parts distributor.
For technical assistance, call any of the
following numbers:
(850) 718-1035
(850) 718-1026
Marianna, Florida
(920) 748-3121
Ripon, Wisconsin
A record of each machine, including the serial
number, is on file with the manufacturer. The
serial number decal is located at the rear of the
machine. See Figure 2. Always provide the
machine's serial number and model number
when ordering parts or when seeking
technical assistance.
F232062