Securing Your Baby In The Kiddy Protect; Setting The Height Of The Straps - Kiddy protect Instrucciones De Operación

Fig 3. - Now slide the shoulder belt of the vehicle's own 3-point seatbelt
around the back of the kiddy protect's headrest. Insert the shoul-
der strap in the guide intended for it on the kiddy protect.
Fig 2. - Slide the lap belt of the vehicle's 3 - point seatbelt through both
pelvic guides. Let the tongue plate snap in the belt lock with a
clearly audible "click". Check to make sure it is locked by pulling
on the belt.
Fig 4 - Tighten the vehicle's own 3 - point seatbelt by pulling hard on the
positions showed in fig. 3 and fig. 4.
Some vehicles have so - called retractor locks. This deactivates
the automatic unrolling of the vehicle's own seatbelt system, so
that your kiddy can be firmly installed. Consult the operating
instructions in your vehicle or in the manufacturer's workshop.

5. Securing your baby in the kiddy protect

5.1 Setting the height of the straps

Your kiddy has integrated shoulder straps with 2 different settings for the
height so that your growing baby is always held in an ideal position your
kiddy. Please set the straps in accordance with the following illustrations:
incorrect, too low incorrect, too high
10
ENG
correct