Seat Location For Semi-Universal Installation; Semi-Universal Installation In The Vehicle With K-Fix - Kiddy Guardianfix 3 Manual De Instrucciones

EN
When you install the Guardianfix 3 in universal mode (without
!
k-fix + ), the connectors (E) must be retracted.

5.3 Seat location for semi-universal installation

Semi-universal installation of the child restraint system (A) is only possible in
vehicle seat positions which are equipped with ISOFIX anchorage points. The
Guardianfix 3 can be connected to these ISOFIX anchorage points with the
+
k-fix connectors (E).
The Guardianfix 3 child restraint system (A) can be installed in vehicles and on
seats which are listed in the type list.
The type list is continuously updated. The latest version can be found online at
http://www.kiddy.de/vehicletypelist
The manufacturer recommends the semi-universal installation of the child
restraint system (A) with the k-fix

6 Semi-universal installation in the vehicle with k-fix +

Actuate the unlocking handle (R)at the front underneath the leg extension (K)
(Fig. 12, No. 1). The k-fix
back of the seat (I).
Rotate the connectors (E) 180° such that the connection openings point
towards the vehicle seat (Fig. 13).
Check whether the connector hooks are open by sliding the two unlocking
mechanisms (S) forward. If the locking indicators (T) do not show 'green' , the
connector hooks are open (Fig. 14).
Place the Guardianfix 3 in a vehicle seat location which allows
!
for semi-universal installation (point 5.3) and adjust the vehicle
seat as necessary according to point 5.1.
+
connections (E) when possible.
+ connectors (E) now automatically extend out of the
26