Installation Facing Backwards - Kiddy protect Instrucciones De Operación

4.2 Installation facing backwards

After you have consulted the operating handbook for the vehicle, you can
install your kiddy on the appropriate seat (see 4.1) as follows:
Fig 1. - Make sure that your kiddy faces backwards on the car seat
(please observe the instructions in section 4.1) and place the
holder in the position for driving (see 3.1).
correct
To optimise the installation of the child seat, the correct assembly optical indi-
cator is used (spirit level). Check that the indicator is in the correct position
during and after installation (green area).
Remember that the optical indicator can only operate correctly if your
vehicle is on a flat surface. If necessary you must readjust the assem-
bly.
9
incorrect
ENG