Sunroof - Kiddy protect Instrucciones De Operación

3.2 Sunroof

The sunroof can be adjusted to protect your baby against direct rays from the
sun above the holder (holder in carrying position).
You can assemble and disassemble the sunroof in the following manner:
1.) Slide the sunroof's frame through the loop in the fabric. The rounded end
of the holder must face the fabric.
2.) Press the fastening pins at the end of the sunroof's frame into the holes
intended for them on the kiddy protect. These are located close to the
rotation point of the holder on the side of your kiddy.
3.) When removing the sunroof, tilt the holder towards the child's feet and
push the fastening pins at the end of the frame out of the (fastening) ho-
les
Loosen the cover on your kiddy to make it easier to find the fastening holes
on the sides.
loop
fastening pin
frame
rounded end
7
foot piece
fastening hole
ENG