Tabla de contenido
Idiomas disponibles
Idiomas disponibles
en
ENGLISH
For a complete range of accessories, see
www.metabo.com or the catalogue.
10. Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
11. Environmental Protection
Do not allow battery packs to come into contact with
water!
Protect the environment, and do not dispose
of power tools and battery packs with house-
hold waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-circu-
iting (e. g. by protecting them with adhesive tape).
f
12. Technical Specifications
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U
=
voltage of battery pack
n
=
no-load speed
0
ø
=
Maximum drill diameter
max
s
=
Maximum impact rate
max
W
=
Single impact force
S
=
Single impact performance
m
=
Weight with smallest battery pack
D
=
Collar diameter
Measured values determined in conformity with
EN 60745.
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. Depending on the operating
conditions, the condition of the power tool or the
accessories, the actual load may be higher or lower.
For assessment purposes, please allow for breaks
and periods when the load is lower. Based on the
adjusted estimates, arrange protective measures
for the user e.g. organisational measures.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a
=
Vibration emission value (hammer
h, HD
drilling into concrete)
a
=
Vibration emission value (chiselling)
h, Cheq
K
= Uncertainty (vibration)
h,HD/Cheq
Typical A-effective perceived sound levels:
L
=
Sound-pressure level
pA
12
L
=
Acoustic power level
WA
K
, K
= Uncertainty
pA
WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Tabla de contenido
