Maintenance And Repair - Ryobi RGS410 Manual De Utilización

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

EN DE

Release the trigger lock button and continue to squeeze

■

the trigger for extended operation.

STOPPING THE GRASS SHEAR / SHRUBBER

Release the trigger to stop the grass shear / shrubber.

■

Upon release of the trigger, the trigger lock button will

■

be automatically reset to the lock position.

REMOVING THE BLADE (GRASS SHEAR/SHRUBBER)

See Figure 6 - 7

Remove battery pack from unit and place unit upside

■

down on a workbench

Slide the latch to the unlock position.

■

Slide the bottom cover back to remove.

■

Lift blade from blade post.

■

INSTALLING THE BLADE (GRASS SHEAR / SHRUBBER)

Remove battery pack from unit and place unit upside

■

down on a workbench.

Remove bottom cover.

■

Fit blade into blade post.

■

NOTE: When properly aligned, the blade assembly fits in

recessed slot in motor housing.

Re-install the cover.

■

Slide latch to the lock position.

■

OPERATING TIPS

Before starting your grass shear / shrubber, hold the unit

■

with the cutting blades directed away from you. Always

use the unit properly.

Keep from trimming too close to dirt, sand or gravel.

■

This can cause the blades to dull, reducing the cutting

efficiency.

Do not force the unit through dense growth. If the blades

■

slow down, reduce your pace.

If blades do become jammed, stop the motor, allow

■

the blades to stop and remove the battery pack before

attempting to remove the obstruction.

HOLDING THE GRASS SHEAR / SHRUBBER

Dress properly to reduce the risk of injury when

operating this unit. Do not wear loose clothing or

jewelry. Always wear eye protection when in use.

Wear heavy, long pants, boots and well fitting gloves.

Do not wear short pants, sandals or go barefoot.

Hold the unit by the rear handle with the blade directed

■

away from you.

English (original instructions)

DA NO

WArNINg

HU CS RU

USING THE GRASS SHEAR

HU CS RU

See Figures 5

Use the grass shear for decorative trimming of grass

■

HU CS RU

around trees, walkways, flower beds, etc.

HU CS RU

With the blade parallel to the ground, start unit and trim

grass in a forward motion.

HU CS RU

If blade jams on any electrical cord or line, DO

HU CS RU

NOT TOUCH THE BLADE! IT CAN BECOME

ELECTRICALLY LIVE AND VERY DANGEROUS.

HU CS RU

Continue to hold the grass shear / shrubber by the

insulated rear handle or lay it down and away from you

CS RU

in a safe manner. Disconnect the electrical service to

the damaged line or cord before attempting to free the

blade from the line or cord. Failure to heed this warning

HU CS

will result in serious personal injury or possible death.

HU CS

RU RO

Clear the area to be cut before each use. Re-move all

HU CS

RU RO

objects such as cords, lights, wire, or string which can

become entangled in the cutting blade and create a

HU CS

RU RO

risk of serious personal injury.

HU CS

RU RO

HU CS

RU RO

Avoid using solvents when cleaning plastic parts. Most

HU CS

RU RO

plastics are susceptible to damage from various Types

of commercial solvents and may be damaged by their

HU CS

RU RO

use. Use a clean cloth to remove dirt, oil, grease, etc.

When servicing use only identical Ryobi replacement

HU CS

RU RO

parts. Use of any other parts can create a hazard or

cause product damage.

Do not at any time let brake fluids, gasoline, petroleum

based products, penetrating oils, etc., come in contact

with plastic parts. They contain chemicals that may

damage, weaken, or destroy plastics.