Kohler K-697 Guia De Instalacion página 10

Cold
3. Shower Only Valve Installation
Flush the hot and cold water supply lines to remove any debris.
Use thread sealant and connect the hot and cold water supply
lines to the valve inlet ports.
NOTE: If the existing hot and cold plumbing is reversed, see the
"Reversed Inlet Supplies" section.
Connect the water outlet lines to the valve ports.
IMPORTANT! Secure the piping to the framing.
IMPORTANT! Secure the valve to the framing in 2x6 installations.
Install the nipple following the directions included with the trim.
Turn on the water supply lines to the valves.
Run the water through the valve and shower outlet.
1066046-2-B
Hot
10 Kohler Co.