Tap Body Assembly; Cleaning Of Fridge - Sencotel 121c Manual De Empleo

7.1.9 Tap body assembly

To assemble the tap body proceed as follows:
-Lubricate and assemble both plunger (H) O-rings in its place.
- introduce the plunger (H) in its place taking care in align the
plunger´s square groove with the rectangura groove on the
front of the tap body.
- Place the lever (G) in the tap body and introduce the pin (I)
through the lever hole.
- Assemble the O-ring in the pin (I).
- Lubricate and place the tap body bolt (L) O-ring.
-Lubricate and place the tap body rear O-ring.
Reassemble the machine's tap body by tightening both
handles at time
.

7.2 Cleaning of fridge

To clean the fridge proceed as follows.
- Remove the fridge top tray. Press the tray retainer and
remove it pulling downwards.
SL320003270 Ed 03_EN
-Remove the fridge bottom tray.
- Clean the walls, floor and evaporator of the fridge with a
sponge wet with drinking water. Cover the same areas using a
sponge soaked with disinfectant solution and wait for 10/15
minutes. Carefully remove the disinfectant using a sponge wet
with water and dry all parts of the fridge well, above all the
evaporator blades inside the fridge.
Clean both top and bottom trays, firstly, with water and then
using a disinfectant solution. Wait for 10/15 minutes for it to act
and rinse well with water, dry and replace it inside the fridge.
20