Troubleshooting; Environmentally-Friendly Disposal; Package Information - De Dietrich DOE7900XE Manual De Instrucciones

Rack Positions
Rack 4
Rack 3
Rack 2
Rack 1
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure,
first remove the lower, and than the upper side from installation location.
To install wire racks; reverse the procedure for removing wire rack.

TROUBLESHOOTING

You can solve the problems you can face with your product by
checking the following points before calling the technical service.
If Oven Doesn't Work;
• Check if electrical cable of the oven is plugged.
• Safely check if there is power in the network.
• Check the fuses.
• Check if electrical cable of the oven is damaged.

ENVIRONMENTALLY-FRIENDLY DISPOSAL

PACKAGE INFORMATION

Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do
not dispose of the packaging materials together with the domestic or
other wastes. Take them to the packaging material collection points
designated by the local authorities.
It is important to place the wire grill into the
oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
are shown in the next figure. You may place
a deep tray or a standard tray in the lower
and upper wire racks.
Dispose of packaging in an environmentally-friendly
manner.
This appliance is labelled in accordance with European
Directive 2012/19/EU concerning used electrical and
electronic appliances (waste electrical and electronic equip-
ment - WEEE). The guideline determines the frame
work for the return and recycling of used appliances as
applicable throughout to the EU.
EN
23