Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
Lack of material
discharge or no
material discharge
Intermittent material
flow
Sand blasting pattern
is not as expected
ENVIRONMENTAL PROTECTION
Recycle undesired substances instead of disposing them as waste. All tools, accessory
parts and items of packaging must be sorted, taken to a recycling centre and disposed
of in an environmentally friendly manner.
DISPOSAL
Dispose of this product at the end of its service life in accordance with the disposal
provisions of your region. Ask your local waste disposal authority about recycling
measures.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Possible causes
1. The air is not dry enough
2. Air pressure is too low
3. Moisture in the blasting
material
4. Excessive soiling in the
blasting material
5. Clogged nozzle
6. Funnel empty
Air pressure is too low
1. The air is not dry enough
2. Grain size of the blasting media
not uniform
3. Impure blasting material
Tel.: 02196 720480
Fax.: 02196 7204820
Probable solutions
1. Use clan and dry air
2. Increase the air pressure
3. Use dry blasting material
4. Empty and have the blasting material filtered
5. Make sure that no blasting material
clumps block the nozzle channel.
We recommend using a
blasting gun in order to clean the
nozzle if required.
6. Fill the funnel
Increase air pressure
1. Use clan and dry air
2. Replace the blasting material
3. Clean and / or replace the
blasting material
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
