Using Keypad To Edit Counting Data; Library Mode; Library Operation; Entering Data Directly Into Library - OHAUS TC3RS Manual De Instrucciones

Trooper Count Scale

3.3.5 Using Keypad to Edit Counting Data

The APW, Pre-Set Tare (PT) and the accumulated count (MR) can be viewed and edited in the DATA window. While
in weigh mode repeatedly press the Data button until the APW indicator is lit. A new APW value may be entered via
the keypad and accepted with an Enter press. PT and MR can also be similarly edited.

3.4 Library Mode

The Trooper Count scale allows the storage of part/counting data in 60 locations, designated ID 00 to ID 59. Each
location includes: part number, Average Piece Weight (APW), a pre-set tare value, over and under count values and an
accumulated piece count.
Data in the library is saved in a manner similar to a computer file. Temporary editing of the data will not affect the saved
data. When desired, the temporary edits can be saved, allowing the scale to be turned off without losing the changes.
Data in ID 00 may not be saved permanently but the data can be easily copied to another location.
The Library, ID 01 to ID 59, can be locked (see 4.9 Lockout Menu) to prevent unauthorized changes to the data. The
accumulated count will not be locked allowing it to be updated. When turned on, the scale defaults to ID 00.

3.4.1 Library Operation

To enter the Library, momentarily press the LIBRARY Save button. A short press in Library mode will exit to weigh
mode.
• M+ and M- buttons advance through the blinking choices.
• The Enter button accepts the blinking choice.
• The Data button returns to the previous choice.
• The Clear button will clear blinking data or back space during data entry.
• Three rapid beeps indicates an error, an improper button press or data value.

3.4.2 Entering Data Directly into Library

The following example is used to illustrate how to enter data in a particular library location.
Short press on the LIBRARY Save button.
Short presses on the M+ or M- buttons will display
library locations which are already used.
Using the numeric keys, enter the desired library num-
ber. The sample shown is an empty location, ID 22.
Press the Enter button to accept ID 22.
Press the Enter button, to edit the part number or press
M+ to skip.
WEIGHT
kg g
oz
lb Net B/G %Ac
BLINKING
WEIGHT
kg g
lb oz Net B/G %Ac
DATA COUNT
<
PT APW MR
T M
DATA COUNT
<
T PT APW MR M
BLINKING
11
>
PCS
>
PCS