Lockout Menu - OHAUS TC3RS Manual De Instrucciones

22

4.9 Lockout Menu

The Lockout menu (LOC) is a software-controlled feature that allows the Calibration, Setup, Read, Print and Count
menus and the Library data to be locked to restrict tampering. When a menu or the Library is locked, the data can be
viewed but not changed. To further restrict tampering, the Lock Switch on the circuit board can be set to prevent
changes to the Lockout menu. See section 5.3 for Lock Switch information.
Procedure
If you have just finished entering data in the Count
menu, press the Data button to go back to the COUNT
MENU. COUNT should be blinking. Press M- button
to advance to the LOC menu. Press the Enter button.
Navigate through the menu as explained in section
4.3.1.
LOC CAL - When set to ON, locks the CAL calibration
sub-menu. Select ON or OFF.
LOC SETUP - When set to ON, locks the SETUP sub-
menu. Select ON or OFF.
LOC READ - When set to ON, locks the READ sub-
menu. Select ON or OFF.
LOC PRINT - When set to ON, locks the PRINT sub-
menu. Select ON or OFF.
LOC COUNT - When set to ON, locks the COUNT sub-
menu. Select ON or OFF.
LOC LIB - When set to ON, locks the Library records
but still allows the accumulated memory to update (if
activated). Select ON or OFF.
NOTE: Location 00 cannot be locked.
WEIGHT
kg g
lb oz Net B/G %Ac
BLINKING
WEIGHT
kg
g
oz
lb Net B/G %Ac
WEIGHT
kg g
oz
lb Net B/G %Ac
WEIGHT
kg g
oz
lb Net B/G %Ac
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg g
lb oz Net B/G %Ac
WEIGHT
kg g
lb oz Net B/G %Ac
Trooper Count Scale
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
PT APW MR
T M
DATA COUNT
<
PT APW MR
T M
DATA COUNT
<
PT APW MR
T M
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR M
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS
>
PCS