Compliance - OHAUS TC3RS Manual De Instrucciones

Trooper Count Scale

7.3 Compliance

Compliance to the following standards is indicated by the corresponding mark on the product.
Marking Standard
This product conforms to the EMC directive 2004/108/EC, the Low Voltage Directive 2006/95/EC and the Non-
automatic Weighing Instruments Directive 2009/23/EC. The complete Declaration of Conformity is available
online at www.ohaus.com.
AS/NZS4251.1, AS/NZS4252.1
Important Notice for verified weighing instruments
Weighing Instruments verified at the place of manufacture bear one of the preceding marks on the packing
label and the green 'M' (metrology) sticker on the descriptive data plate.
They may be put into service immediately.
Weighing Instruments to be verified in two stages have no green 'M' (metrology) on the descriptive data plate
and bear one of the preceding identification marks on the packing label. The second stage of the initial
verification must be carried out by an authorized and certified service organization established within the
European Community or by the National Notified Body.
The first stage of the initial verification has been carried out at the manufacturer's work. It comprises all tests
according to the adopted European Standard EN 45501:1992, paragraph 8.2.2.
If national regulations limit the validity period of the verification, the user of the weighing instrument must
strictly observe the re-verification period and inform the respective Weights and Measures authority.
FCC Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Industry Canada Note
This Class B digital apparatus complies with Canadian ICES-003.
ISO 9001 Registration
In 1994, Ohaus Corporation, USA, was awarded a certificate of registration to ISO 9001 by Bureau Veritus Quality International
(BVQI), confirming that the Ohaus quality management system is compliant with the ISO 9001 standard's requirements. On
May 21, 2009, Ohaus Corporation, USA, was re-registered to the ISO 9001:2008 standard.
33