Positive Counting; Negative Counting - OHAUS TC3RS Manual De Instrucciones

10
3.3.2 Negative Sampling (Cont.)
If a weighing container is to be used:
• If the tare value is known, enter a Pre-Set Tare.
• If the tare value is not known, place the container on the pan and press the TARE button.
Press the SAMPLE Menu button.
WEIGHT
kg g
oz
lb Net B/G %Ac
Press the M- button.
WEIGHT
kg g
lb oz Net B/G %Ac
Place the total number of pieces on the pan, then press the Enter button.
WEIGHT
kg
g
lb oz B/G %Ac
Net
Remove 10 pieces as instructed, or use the keypad to change the number of pieces to be removed, then press Enter
button.
Place the pieces that were removed back on the scale
to display the total number of pieces.
NOTE: If AUTO-ADD is ON, the Scale may direct you to
remove additional pieces if the reference weight is too
small.

3.3.3 Positive Counting

After sampling, place additional pieces on the scale and view the piece count in the COUNT display.

3.3.4 Negative Counting

After sampling, place the entire quantity of pieces on the scale. Press the ON/ZERO Off button. As pieces are removed,
the quantity removed is shown in the COUNT display as a negative number.
DATA COUNT
<
PT APW MR
T M
DATA COUNT
<
T PT APW MR M
DATA COUNT
<
T PT APW MR M
>
M
PCS
>
M
PCS
>
M
PCS
WEIGHT
kg g
lb oz Net
Trooper Count Scale
COUNT
< >
PCS M
COUNT
< >
M
PCS
COUNT
< >
M
PCS
DATA
B/G %Ac T PT APW MR M
COUNT
< >
PCS
COUNT
< >
PCS
COUNT
< >
PCS
COUNT
< >
PCS