Automatic Scan - Televes RSD - 7296 Instrucciones De Uso

User Manual User Manual

10.- Automatic scan

To carry out an automatic scan for the channels offered by the satellites in
your installation, press OK over the -Automatic scan- option in the main
Menú.
You can carry out the channel scan in a satellite if the satellite that has been
selected in the -Dish Setup- Menú has been correctly assigned to an anten-
na.
The options are:
- Add channels: To select one of the satellites use the
press OK to activate the pop-up Menú.
- Polarisation: Using the
that you wish to use to carry out the scan. The options are Horizontal
(H) , Vertical (V) and Horizontal + Vertical (H+V).
- Starting frequency: Using the numeric buttons, indicate the frequency
at which you want the scan to start.
- Ending frequency: Using the numeric buttons, indicate the frequency
at which you want to the scan to stop.
- 1/2/3 symbol rate: Using the numeric buttons, indicate the symbol
frequency that you are going to use for the scan. If you only want to
use one, you must enter a "0" in the rest.
- FTA / All: Indicate if you want to search for all of the satellite channels
(ALL) or only for those that are free-to-air (FTA).
If you want to stop the scanning process before it has finished, you must
press the EXIT button on the remote control.
/
or buttons, select the type of polarity
67
buttons or
"RSD - 7296" "RSD - 7296"