Televes RSD - 7296 Instrucciones De Uso página 45

User Manual
When the antenna is orientated correctly, press the OK button.
Before starting an automatic search in the satellite, use the
buttons to select the type of search that you want to carry out
(only free-to-air channels - FTA, all channels - ALL, only TV chan-
nels or only Radio channels). Using the
access the "Organised by" window in order to be able to define the
way to organise the channels that have been found. Use the
buttons to select the order according to the "Satellite" or to
select alphabetical order (from "A to Z" or from "Z to A").
Press OK to start searching.
- Two antennas.
Select the type or types of converters that you have in your installation,
using the or buttons, and confirm this selection by pressing the
OK button.
The options that are available are:
- One universal LNB (1 LNB per antenna)
- One universal LNB plus Two universal LNBs
- One universal LNB plus One Twin LNB
- One universal LNB plus One Quad LNB
In the "Satellite" window (input A), use the
the desired satellite for input A of the multiswitch. To change the
parameters of input "B" press the button 2 on the remote control and
then use the or
choose which one you desire. To return to the input "A" parameters
press the button 1. Use the
"Carriers" window where you will be able to select various operators
of the selected satellite using
Now with the help of the compass, direct the antennas towards the
desired satellites until you receive the best possible signal level.
If you do not receive a level higher than 60%, follow these steps:
- Go to the "Carriers" window if input "A" or "B" depending on the
satellite and using the
king to see if the level has increased.
- Confirm the inclination angle and the position of the antenna.
- Check the position of the LNB.
When the antennas are orientated correctly, press the OK button.
Before starting an automatic search in the satellite, use the
buttons to select the type of search that you want to carry out
(only free-to-air channels - FTA, all channels - ALL, only TV chan-
nels or only Radio channels). Using the
access the "Organised by" window in order to be able to define the
way to organise the channels that have been found. Use the
buttons to select the order according to the "Satellite" or to
select alphabetical order (from "A to Z" or from "Z to A").
Press OK to start searching.
or
or
buttons over the "Satellite" window (input B) to
or buttons to access the
or buttons.
or buttons modify the operator chec-
or
45
or
buttons, you can
or
buttons to select
or
buttons, you can
or
"RSD - 7296"