Vcr Timer - Televes RSD - 7296 Instrucciones De Uso

User Manual User Manual

8.4.- VCR Timer

The receiver has a timer which can automatically switch the Receiver on
and off at a specified time. It has 8 positions, in which you can record the
same amount of programmes. You simply have to enter the following data.
This Menú has two columns; the left-hand column -Service List- where the
list of all the available channels appears and the right-hand column -Timer
Settings - where you can enter the data that you wish.
By default, the cursor always appears on the channel list. First select the
channel that you want to see when you switch the receiver on. User the
or buttons to do this. Press OK over the selected channel. The cursor
will now automatically appear on the right-hand column to enter the data:
- Timer no..- Select one of the 8 available programmes by using the buttons.
- Timer Mode.- By default, this appear in "Once" mode (one time), but you
can select "Daily" (everyday), "Weekly" (once a week), "Monthly" (once a
month) or "Off" (de-activated). Select one of these options by using the
or buttons.
- Date.- By default the current day and month appear. You can change
this date by using the numeric buttons (0 .. 9) on the remote control.
- Start time.- Using the numeric buttons, enter the time that the pro-
gramme starts.
- Duration.- Using the numeric buttons, enter the estimated duration of
the programme.
Press OK to confirm all of the programme data. This will take you back to
the service list.
Repeat these same steps to record other programmes.
The "General List" / "Timer List" option lets you return to the general list
whenever you wish or else see a list of the timers set to record.
If you wish to eliminate any of these settings, you can do so by selecting it
from the programme list and pressing OK over the "Delete" option.
To exit this Menú, press EXIT.
or
56
"RSD - 7296" "RSD - 7296"