Televes RSD - 7296 Instrucciones De Uso página 54

User Manual User Manual
- Delete channels: With the cursor over this option, move to the left by
pressing the button.
To erase a channel, press the OK button over the chosen channel. A
symbol will appear indicating its new status. You can select various
channels to erase in one go, by pressing OK over each one. By pres-
sing OK again over a channel that was already marked, you de-select
the channel and it will not be erased.
To erase all channels of one alone time, press ALT key and all channels
will be marked by the symbol (
To erase channels that have been marked, press EXIT.
Whether you want to erase one channel, various channels or all of
them, a new window will appear asking for confirmation to erase them
(YES) or to exit the Menú without carrying out any modifications (NO).
- Move channels: If you want to move a channel from its current posi-
tion in the general list, you must first select this channel in the list and
then go to the right-hand side by pressing the
Place the cursor on the "Move" option, enter the number of the new
position of the channel into the remote control. Press OK.
To exit the Menú press the EXIT button.
- Edit the PID and PCR values: If you want to modify the Audio and
Video PID parameters or the PCR of a channel, you can do so using
this Menú.
Place the cursor on the "Video", "Audio" or "PCR" option and enter the
new values for these option in the remote control.
To exit the Menú press the EXIT button.
- Add PID (Manual Scan): If you want add a new channel to the list of
channels but you do not want to carry out an automatic search, this
option allows you to do so. First, you must know the Video PID, Audio
PID and PCR values of the new channel as well as the frequency, sym-
bol rate and polarity.
Place the cursor on the -Add PID- option and press OK.
A new Menú will appear where you will be able to enter the values
required in order to scan for the new channel.
To move through the options, use the
"Satellite name" and "Polarisation" values should be selected using
the and buttons.
Once all of the values have been introduced, press OK. The new chan-
nel will be added to the list.
).
button.
and buttons. The
54
"RSD - 7296" "RSD - 7296"