Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
10
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Technical data
Voltage
Vac 230
Power input
No-load speed
min
Disc diameter
mm 115
Disc bore
mm 22
Max disc thickness
grinding discs
mm 6
cutting discs
mm 3.5
Spindle size
mm M14
Weight
kg 2.1
Voltage
Vac 230
Power input
W 900
No-load speed
min
Disc diameter
mm 100
Disc bore
mm 16
Max disc thickness
grinding discs
mm 6
cutting discs
mm 3.5
Spindle size
mm M10
Weight
kg 2.1
Level of sound pressure according to EN60745:
Sound pressure (L
) 91
pA
Sound power (L
) 102
WA
Vibration total values (triax vector sum)
according to EN 60745:
Surface grinding (a
) 7 m/s
h,AG
Cutting-off (a
) 2.5 m/s
h
AST15
KG725
TYPE 3
TYPE 3
230
W 900
701
-1
10,000
21,000
125
22
6
3.5
M14
2.1
KG900
KG915
KG925
TYPE 3
TYPE 3
TYPE 3
230
230
900
900
-1
10,000
10,000
10,000
115
125
22
22
6
6
3.5
3.5
M14
M14
2.1
2.1
dB(A), uncertainty (K) 3 dB(A)
dB(A), uncertainty (K) 3 dB(A)
2
, uncertainty (K) 1.5 m/s
2
, uncertainty (K) 1.5 m/s
2
2
Tabla de contenido
