While In Use; Symbols; Instructions; Maintenance - Chauvin Arnoux F 62 Manual De Instrucciones

1.1.2. While in use

•
Never exceed the maximum safe values indicated in
the specifications for each type of measurement.
•
When the clamp-on meter is connected to the
measuring circuits, do not touch any unused
terminal.
•
Before changing functions, disconnect the measuring
cords from the circuit being measured.
•
Never perform resistance measurements on a live
circuit.

1.1.3. Symbols

Refer to the operating manual
S e reporter à la notice de fonctionnem ent
Risk of electric shock
R isque de choc électrique
Double insulation
Isolation double

1.1.4. Instructions

Before opening the instrument,
-
you must disconnect it from the measuring circuits
and check that you are not charged with static
electricity, which could destroy internal components.
- A "qualified person" is someone familiar with the
installation, construction, use, and hazards. He/she is
authorized to start up and shut down the installation
and equipment, in conformity with the safety rules.

1.1.5. Maintenance

Clean the instrument with a damp cloth and soap. Do not
use abrasive substances or solvents.
20
English
F 62