Functional Description; Alternating Current Measurement (A Range) - Chauvin Arnoux F 62 Manual De Instrucciones

English
4.

FUNCTIONAL DESCRIPTION

4.1. Alternating current measurement (A range)

Set the switch to A~.
Open the clamp by pressing the trigger.
Place the clamp around the conductor to be measured
and release the trigger; check that the clamp is properly
closed. Read the measurement on the display unit.
Note : As a safety measure, disconnect the measuring
cords from the clamp before performing this operation.
The clamp must be placed around a single conductor of a
circuit, since otherwise the measurement may be thrown
off. The measurement is optimal with the conductor
centred in the middle of the jaws.
26 F 62