Steam Condenser Assembly; Hood Assembly - Salva LT + LTE Instrucciones De Montaj

3.6. Steam Condenser assembly

3.7. Hood assembly

Montaje_Labe_17_(c-f-i)260617
The steam output material kit must be assembled in order to
install the condenser.
First mount the steam output kit and then the condenser
Position the condenser above the oven and secure with tap-
ping screws.
The steam condenser is fitted with a connector for any pos-
sible cut-out.
The extraction hood is mounted above the oven. The top of
the ovens is prepared for four holes. In order to prevent the
hood from overturning, secure with two screws and two lugs.
B
Detalle B
-75-
A
Detalle A
lx064m03.dft
A
lx064m02.dft
salva
Detalle A