Using The Iq Connect Feature - Dacor DTG30M954F Serie Manual De Usuario

Using the iQ Connect feature

The cooktop has a built-in Wi-Fi module that you can use to sync the cooktop with the
SmartThings app. This app lets you:
• Monitor the operating status and the power level settings of the cooktop elements.
• Check and change the timer settings.
The SmartThings app may not work properly if Wi-Fi communications are compromised
(e.g., blocked by other electronic appliances or outside electrical interference) or if the
cooktop is installed where the signal is weak (e.g., far from the Wi-Fi source).
Connecting the cooktop
Before you can remotely control your cooktop, you must pair it with the SmartThings app.
1. Download and open the SmartThings App on your smart device.
2. Follow the app's on-screen instructions, then press-hold the iQ Connect button for 3
seconds.
NOTE
• The iQ Connect LED indicator stops blinking but remains on, indicating the connection
was successful.
• If the iQ Connect LED does not appear, follow the app's instructions to reconnect with
the cooktop.
NA9300K_MOD_DTG30M954FS_DG68-00927A-02_EN+MES+CFR.indb 27
English 27
2019-04-23 3:00:00