Tabla de contenido
示教模式
65
示教模式
66
故障诊断
67
表
WTF12G TranspaTect | SICK
38
Image 42: G
物体示教模式 /
示教时间 /
Teach-in mode for
Teach-in time
objects
< 2 s
单示教按键 /
> 2 ... < 5 s
Single teach-in
pushbutton
表 67 中罗列了传感器无法执行某项功能时应采取的各项措施。
LED 指示灯 /
LED indicator
绿色 LED 未亮起 /
Green LED does not light up
绿色 LED 未亮起 /
Green LED does not light up
绿色 LED 未亮起 /
Green LED does not light up
校准 /
LED 指示灯 /
Alignment
LED indicator
指向背景的传感
器 /
Sensor to back‐
ground
原因 /
Cause
无电压或电压低于极限值 /
No voltage or voltage below the
limit values
电压中断 /
Voltage interruptions
传感器损坏 /
Sensor is faulty
结果 /
Results
无功能变化 /
No change in func‐
tion
根据背景调整开关
距离，识别从传感
器和背景之间移入
的物体 /
Sensing range is
set to background,
oncoming objects
between sensor
and background
are detected
措施 /
Measures
检查电源，检查整体电气连接
（导线和插头连接） /
Check the power supply, check all
electrical connections (cables and
plug connections)
确保电源稳定无中断 /
Ensure there is a stable power
supply without interruptions
如果电源正常，则更换传感器 /
If the power supply is OK, replace
the sensor
8016605
Subject to change without notice
Tabla de contenido
