Tabla de contenido
Commissioning
WTF12G TranspaTect | SICK
2
600
(23.62)
500
(19.69)
Non-transparent trays
400
(15.75)
300
(11.81)
200
(7.87)
100
(3.94)
0
100
200
300
400
(3.94)
(7.87) (11.81) (15.75) (19.69) (23.62) (27.56)
Adjustment range background (x)
Legend:
x: Sensing range max. in mm (adjustment range background)
= Distance sensor / background
y: Sensing range in mm (detection range object)
= Maximum distance sensor / front edge of the object
Minimum distance sensor / background : 150 mm*
*) Referring to the background with 90 % remission equivalent to standard white DIN 5033 (i.e. glass-bead blasted
stainless steel). The use of a shiny background can increase the minimum distance to the background (i.e. brushed
and pickled stainless steel, minimum distance sensor to background: 300 mm).
Image 1: H
Mount the sensor using a suitable mounting bracket (see the SICK range of accessories).
Note the sensor's maximum permissible tightening torque of 2.0 Nm.
Note the preferred direction of the object relative to the sensor.
To ensure maximum detection reliability, the following installations are recommended for the
mounting of sensors for detecting transparent objects:
Detection of transparent trays: vertical mounting
Detection of transparent bottles: horizontal mounting
The sensors must be connected in a voltage-free state (V
[B] must be observed, depending on the type of connection:
– Male connector connection: pin assignment
– Cable: core color
Image 2: B: WTF12G-3P/Nxxxx
Image 3: B: WTF12G-3Kxxxx
Only apply voltage/switch on the power supply (V
been completed. The green LED indicator lights up on the sensor.
Explanations of the connection diagram (Graphic B):
Transparent trays
500
600
700
> 0 V) once all electrical connections have
S
= 0 V). The information in the graphics
S
8016605
Subject to change without notice
Tabla de contenido
