Orbit WaterMaster rain Manual Para El Usuario página 16

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ENGLISH
then press enter. Remember, each start time will activate all stations that are
programmed to operate. There are not separate start times for each station. Start
times do not correspond to specific stations.
• Up to four start times can be entered per program (A or B
Watering Durations for Program A or B
The way you set the watering duration is the same for all programs. To set the
duration for each program you will be using, do the following:
(Note: Both programs require watering durations to be programmed.)
• Turn the rotary dial to the Station Duration position in either the A or B program.
The display will show which program you have selected with an "A" or "B" and
the – – MINS and the cursor blinking at station "1" [See Figure 5].
• You may set the watering duration from 1 to 99 minutes. Press and hold the + key
to advance the number of minutes, or use the – key to go in reverse, then press
Enter. When the minutes are set, a solid "A" or "B" will appear over station 1
and
the cursor will advance to station 2 and continue blinking.
11
Figure 5: Station Duration for Program A
Tabla de contenido
loading

Tabla de contenido