Orbit WaterMaster rain Manual Para El Usuario página 26

ENGLISH
Mounting the Timer
• Screw a No. 8 screw at eye level leaving the screw head extended out from the
wall about 1/8 inch. Use expanding anchors in plaster or masonry if necessary.
• Slip the keyhole in the back of the timer over the extended screw.
• Screw a No. 8 screw through each of the two holes at the bottom of the timer
box into the wall [See Figure 15].
Wiring the Electric Valves
• If the distance between the timer and valves is less than 700 feet (210 M), use
WaterMaster sprinkler wire or 20-gauge (AWG) plastic jacketed thermostat
®
wire to connect the timer to the valves. If the distance is over 700 feet (210 M),
21
Figure 15: Mounting the Timer