Description - Hilti TE 6-A36 Manual De Instrucciones

Obligation signs
Wear eye Wear a hard
protection hat
Wear Read the
breathing operating
protection instructions
before use.
Symbols
Return Drilling
materials for without
recycling hammering
Direct Rated speed
current under no
load
Forward /
reverse

2 Description

2.1 Use of the product as directed
The TE 6-A36-AVR(03) is a hand-held, cordless rotary hammer for driving or removing screws, drilling in steel, wood
and masonry and hammer drilling in concrete and masonry.
Use this product only with Hilti Li‑ion batteries of the B 36 series.
Use only Hilti chargers of the C4⁄36 series with these batteries.
The power tool may be used only in a dry environment.
Do not use the power tool where there is a risk of fire or explosion.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not
as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
Modification of the power tool or tampering with its parts is not permissible.
Do not use the battery as a power source for other unspecified appliances.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Wear ear Wear
protection protective
gloves
Hammer Volts
drilling
Revolutions Diameter
per minute
Location of identification data on the power tool
The type designation can be found on the type identifica-
tion plate and the serial number on the side of the motor
housing. Make a note of this data in your operating in-
structions and always refer to it when making an enquiry
to your Hilti representative or service department.
Type:
Generation: 03
Serial no.:
en
15