Intended Use; Power Level Indicator - Hilti TE 700-AVR Manual De Instrucciones

▶ Make sure that the workplace is well ventilated and, where necessary, wear a respirator appropriate for
the type of dust generated. Contact with or inhalation of the dust may cause allergic reactions and/or
respiratory or other diseases to the operator or bystanders. Certain kinds of dust are classified as
carcinogenic such as oak and beech dust, especially in conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing asbestos may be handled only by specialists.
▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool may become live, presenting a risk of electric shock, if you damage
an electric cable accidentally.
Careful handling and use of electric tools
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Overview of the product
Chuck
@
Function selector switch
;
Power level selection switch
=
On/off switch
%
Grip
&
Indicators
(
Supply cord
)

3.2 Intended use

The product described is an electrically powered breaker for medium-duty chiseling work. It is designed for
removing and breaking up concrete, masonry and stone.
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system, which reduces vibration
significantly.
3.4 Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator blinks red.
Note
Bring the product to Hilti Service in good time. This will help to ensure that it's always ready for use.

3.5 Power level indicator

The breaker is equipped with a power level indicator LED.
Chiseling power can be reduced to approx. 70% by pressing the power level selector switch. The power
level LED then lights up, indicating reduced power.
14 English
Printed: 11.04.2017 | Doc-Nr: PUB / 5071171 / 000 / 05
1
+
§
/
:
∙
$
Meaning
•
•
•
•
Air vents
Knob
Side handle
Theft protection indicator (optional)
Service indicator
Power level indicator
End of service interval – servicing is due.
A fault has occurred in the tool.
The overheating prevention cut-out has been
activated.
The voltage provided by the electric supply is
too high.