Ritter contura3 Instrucciones De Uso página 13

English
Risk of electric shock
– Always remove the power plug
from the socket in the event of
a malfunction, before cleaning
and when the appliance is not
in use. When doing so, pull on
the plug and not on the cable.
– Never immerse the appliance
in water. Never expose the
appliance to rain or any other
form of moisture. If the appli-
ance falls into water, unplug the
cable from the mains socket
before removing the appliance
from the water. Have the appli-
ance inspected at an author-
ized service location before
using it again.
– Always ensure that your hands
are completely dry before using
the appliance. Do not use the
appliance if it is wet or damp
or while you are standing on a
damp surface. Do not use the
appliance outdoors.
– Stop using the appliance
immediately if any parts are
damaged and contact the ritter
after-sales service.
– If the power cord is damaged, it
must be replaced by the manu-
facturer, the manufacturer's
after-sales service or a similarly
qualified person to eliminate
risk of personal injury.
8
Risk of injury
– This appliance must not be
used without a slice carriage
or a left-over holder unless the
size and shape of the food to
be sliced means that these
parts cannot be used.
– Before replacing accessories or
add-on parts that move when
operated, the appliance must
be switched off and discon-
nected from the mains.
– The rotary blade is extremely
sharp.
– Never touch the rotary blade
when operating the appliance!
– Switch the appliance off before
cleaning it; pull the power plug
out of the socket and turn the
slice thickness adjustment knob
to the "0" position.
– The rotary blade will continue
to run for a short time after
being switched off.