SICK HSE18 Instrucciones De Operación página 15

8017854.16K9 | SICK
Subject to change without notice
Table 6: Q1 output ACTIVE states with Light/Dark Switching selection potentiometer
HSE18-xxxx_
-xxxxxE
-xxxxxH
L/D Selection
-xxxxxI
Switch
-xxxxxK
-xxxxxP
Time delay
The sensor may be specified with an adjustable time delay. The delay
time is adjusted by rotating the 270° potentiometer.
Clockwise rotation in the direction of the "+" printed on the sensor will
increase the delay time (T
clockwise stop position.
Counter clockwise rotation in the direction of the "-" printed on the
sensor will decrease the delay time. There will be no time delay at the
counter clockwise stop position.
CAUTION
Over rotation of the potentiometer past the stop positions will cause permanent dam‐
age to the sensor.
A L/D selection switch may be specified with an adjustable time delay. Adjustable time
delay does not impact a Health or Alarm output (if specified).
Table 7: Output ACTIVE states for complimentary output variants with adjustable time delay
HSE18-Pxxxx_
HSE18-Nxxxx_
HSE18-Fxxxx_
Q1 = L.ON
No Time Delay
Q2 = D.ON
Q1 = L.ON
-xxxxxC
Adjustabl
-xxxxxF
e ON
-xxxxxI
2
Delay
1
-xxxxxM
Q2 = D.ON
Q1 = L.ON
Q1 = D.ON
). Maximum Delay time will occur at the
DELAY
ELECTRICAL INSTALLATION
6
15