Intended Use; Technical Data - Würth 1 A Traducción Del Manual De Instrucciones De Servicio Original

The device is only designed for the purposes described in this instruction manual. If the
device is used for other purposes, it could result in accidents or in destruction of the
device. In these cases, warranty claims by the operator against the manufacturer shall
be void.
The user is solely responsible for damage resulting from improper
use.
Art.
Voltage range
Power supply
IP code
FI/RCD Test
Overvoltage category
Temperature range
Test standard
Using this device, sockets can be tested for correct installation and incorrect wiring
indicated by means of a visual display.
All potentially life-threatening connection faults of sockets are indicated by various
configurations of the signal lights.
Note
Before use, check the device is operating correctly by testing a correctly
connected socket.
Attention!
Where voltages exceed 30 V there is a risk of electric shocks.

Intended Use

Technical Data

0715 53 001
230 V AC (50 Hz)
across object being measured, max. 3 mA
IP 40
30 mA (at 230 V AC)
CAT II 300 V
0° ∼ +50°C
IEC/EN 61010-1 (DIN VDE 0411)
Socket testing
11