Tabla de contenido
WARNING!
• Connect this exercise product to a properly grounded outlet only.
• Never operate product with a damaged cord or plug even if it is working properly. Never operate any product if it
appears damaged, or has been immersed in water. Contact Customer Tech Support for replacement or repair.
Failure to follow these specifications can cause damage to your product and can void the warranty:
• All video and power outlets must be functional the day of delivery / assembly of the product. The
client is responsible for any additional installation charges associated with return visits.
• Electrical supply may fluctuate in your area. To ensure stable performance of the product, use the proper gauge wire.
ASSEMBLY
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level flat surface. It is recommended that you place a protective
covering on your floor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and
bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly and usage. Please do not wipe
this off. If you have difficulty, a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that special attention must be
paid. It is very important to follow the assembly instructions correctly and to make
sure all parts are firmly tightened. If the assembly instructions are not followed
correctly, the equipment could have parts that are not tightened and will seem
loose and may cause irritating noises. To prevent damage to the equipment, the
assembly instructions must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer
Tech Support. Contact information is located on the information card.
DANGER!
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman if you are
in doubt as to whether the product is
properly grounded. Do not modify the
plug provided with the product. If it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
TOOLS REQUIRED:
F Torque Wrench
F 17 mm Wrench
F 6 mm T-Wrench
F 10 mm Allen Wrench
F 8 mm Allen Wrench
F 4 mm Allen Wrench
F Phillips Screwdriver
PARTS INCLUDED:
F 1 Main Frame
F 1 Pedal Arm Cover Set
F 1 Upper Assembly
F 1 Top Cap Cover
F 1 Front Shroud
F 2 Top Hand Rail Cap Sets
F 2 Upper/lower Dual Action Arms
F 2 Dual Action Arms Caps
F 2 Link Arm Cover Sets
F 1 Console (sold separately)
F 1 Console Bracket
F 1 Power Cord (included with console)
F 1 Hardware Kit
7
Tabla de contenido
