Using The Receiver; Switching The Receiver On/Off; Connecting The Headphones - Sennheiser EK 500 G2 Instrucciones Para El Uso

Using the receiver

Switching the receiver on/off

The receiver can only be switched off when the standard
display is shown on the display panel. When in the
operating menu, briefly pressing the
cancel your entry (ESC function) and return you to the
standard display with the last stored settings.
Note:
Remove the batteries or the accupack when the receiver
will not be used for extended periods of time.
Press the two unlocking buttons
battery compartment cover
Press the
The red LED
To switch the receiver off, press the
until "OFF" appears on the display. The red LED
off.
Close the
compartment cover
click.

Connecting the headphones

To monitor the audio signal, connect headphones with a
3.5 mm jack plug to the headphone output (PHONES)
14
ON/OFF button
lights up.
battery
locks into place with an audible
ON/OFF
.
to switch the receiver on.
ON/OFF
compartment.
button will
and open the
button
goes
The battery
.