Basic Operation; Opening The Netdirector Console Kvm; Closing The Netdirector Console Kvm - Tripp-Lite NetDirector B020-008-17 Manual Del Propietário

5. Basic Operation

5.1 Opening the NetDirector Console KVM

The console is located under the top cover. To
access the console, slide the console module
out and raise the cover.
Note: As a safety precaution, to keep the console
from accidentally sliding out, the console is locked
into the In position. Before you can pull the console
module out, you must release it by pushing the
catches on the unit's front panel toward the center
of the switch.

5.2 Closing the NetDirector Console KVM

To slide the console module back in, close the
cover and do the following:
1. Pull the safety catches on the unit's side
rails toward you and push the module in
until it stops.
2. Release the catches; pull the module
slightly toward you; then push it all the
way in.
Note: The reason for the two-step procedure is to
minimize the chances of pinching your fingers when
sliding the module in.
8