Introduction; Front View Of Console Kvm Switch - Tripp-Lite NetDirector B020-008-17 Manual Del Propietário

3. Introduction

3.1 Front View of Console KVM Switch

1 Handle
Pull to slide the KVM module out;
push to slide the module in (see item
13 in this list).
2 LCD
After sliding the KVM module out,
flip up the cover to access the LCD
monitor.
3 LCD Controls
The LCD On/Off switch is located
here, as well as buttons to control
the position and picture settings of
the LCD. See page 9 for details.
4 Port Switches
Press a switch to bring the KVM
focus to the computer attached to its
corresponding port. See page 10 for
details.
5 Port LEDs (either 16 or 8 LEDs depending on model)
Two Port LEDs are built into the Port Switches. The one on the left is the On Line LED; the
one on the right is the Selected Port LED:
• An On Line LED lights ORANGE to indicate that the computer attached to its
corresponding port is up and running.
• A Selected Port LED lights GREEN to indicate that the computer attached to its
corresponding port is the one that has the KVM focus. The LED is steady under normal
conditions, but flashes when its port is accessed under Auto Scan Mode (see page 11).
6 Keyboard
7 Touchpad
8 Power LED
Lights BLUE to indicate that the unit is receiving power.
9 Rackmounting Tabs
The rackmounting tabs located at each corner of the unit secure the chassis to a system
rack. Refer to page 6 for rackmounting details.
10 Lock LEDs
The Num Lock, Caps Lock, Scroll Lock LEDs are located here.
11 Reset Switch
Located to the right of the Lock LEDs. Press this recessed switch in with a thin object to
perform a system reset.
12 Firmware Upgrade Section
• Firmware Upgrade Port: The Firmware Upgrade Cable that transfers the firmware upgrade
data from the administrator's computer to the Console KVM Switch plugs in here.
• Firmware Upgrade Switch: During normal operation this switch should be in the NORMAL
position. (See page 21 for firmware upgrading details.)
13 Slide Release
In order to bring the console out, you must first release it by sliding these tabs to the inside.
See page 8 for details on sliding the console in and out.
3
5
4
9
6
7
8
4
13
1
2
13
12
11
10
9