Picking Up Liquids - Flex VC 21 L MC Manual De Instrucciones

D
FLEX VC 21 L MC / VCE 26 L MC
GB
When dust removers are used, the rate at which air is exchanged in the room must be adequate if the
F
exhaust air from the vacuum cleaner is blown into the room (please observe regulations valid in your
country).
NL Before starting work, the operating staff must be informed on
– use of the vacuum cleaner
I
– risks associated with the material to be picked up
– safe disposal of the picked up material
N
Operation
S
VC 21 L MC
DK
Switch position
SF
E
VCE 26 L MC ( with Softstart)
P
Switch position
GR
TR
Use the socket on the vacuum cleaner for the purpose defined in the operating instructions only.
SLO

Picking up liquids

Before liquids are picked up, always remove the filter bag. Check that the float works properly. If foam
HR
develops or liquid emerges, stop work immediately and empty the dirt tank.
SK
Cleaning the filter element
If suction performance drops:
CZ
1. Switching on the vacuum cleaner.
2. Close the nozzles or suction hose opening with the palm of your hand.
PL
3. Press the button to start filter cleaning for at least three times for two seconds each. The resulting
stream of air removes attached dust from the slats of the filter elements.
H 4. If the suction power is too low after filter cleaning: replace filter.
Blower function
E
RO
The cleaner has a blower function to clean inaccessible places or to dry the surface of wet items.
BG
Do not direct the air into rooms in an uncontrolled manner. When using the blower function, always
use a clean hose. Stirred-up dust can be hazardous to health. Do not use the blower function in closed
RUS
rooms.
EST Connecting electrical appliances
F
Use the socket on the vacuum cleaner for the purpose defined in the operating instructions only.
LV
Before plugging an appliance into the appliance socket:
1. Switch off the vacuum cleaner.
LT
2. Switch off the appliance to be connected.
CAUTION! Follow the operating instructions and safety instructions for appliances connected to the
power tool socket.
When the power tool is switched off, the VCE 26 L MC continues to run for approx. 5 seconds.
18
I
0
I On, continuously variable adjustment of the suction power
0
Auto-On/Off, continuously variable adjustment of the suction power
Function
On
Off
Auto-On/Off
Function
Off