Seca 242 Manual De Instrucciones Y Garantía página 18

seca 245
– Put the column in the opening.
– Screw the column to the platform from
underneath. If necessary, place the
platform carefully on its side to tighten
up the screws.
– Then stand the column and the plat-
form upright again.
– Remove the cable tie (provided for
transport purposes) on the top measur-
ing rod.
– Push the top measuring rod onto the
plastic guide of the bottom measuring
rod and screw it tight with the pan-
head tapping screw.
Positioning the display housing
There are various options for setting up the display housing.
On a desk top
– Place the display housing flat on a desk
top.
Using the desk-top stand
– Place the desk-top stand on the display
housing from underneath.
The broad side should be at the top of
the display. The desk-top stand en-
gages.
– Place the display housing on a desk
top.
On the wall
– Fit the wall bracket to the wall at the de-
sired height.
– Push the housing display onto the wall
bracket.
18