Attaching The Sitestand Display Bracket - SonoSite SiteStand Manual Do Usuário

Attaching the SiteStand Display Bracket

The SiteStand bracket is provided with the display.
To attach the SiteStand bracket:
20
Chapter 3: Using the Accessories
Use the allen wrench provided to remove the two
1
screws from the clamp. Set the clamp and the
screws aside.
Position the bracket (minus the clamp) on the
2
SiteStand main support.
Rest the bracket on the SiteStand while aligning
3
the clamp with the bracket (encircling the
SiteStand main support).
Reattach the clamp to the bracket using the two
4
screws removed earlier, and lightly tighten the
screws.
Note: The bracket must slide freely on the SiteStand
main support.
Rotate the bracket about 45 degrees toward left
5
(from the front of the SiteStand) on the main
support.
Note: This step allows clearance for insertion of the
SonoSite system into the sleeve from the back of the
SiteStand.
Tighten the two screws on the bracket clamp.
6