Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Product may vary slightly from what is illustrated.
† 1. Water reservoir with flip up lid (Lid - Part# CM-UCM6-003)
2. Brew basket release button
3. Water window with red ball indicator
† 4. Removable brew basket (inside)(Part# CM-UCM6-001)
5. Carafe lid
† 6. 10-Cup/50 oz. (1479 ml) carafe (Part# CM-UCM6-002)
7. Cord storage (back of unit)
8. "Keep Hot" plate
9. Control panel
† Consumer replaceable/removables parts
CONTROL PANEL
1. Brew selectors/ON buttons
2. Brew/ON indicator lights
3. HOUR button
4. PM indicator
5. Digital clock/timer display
6. MIN button
7. AUTO indicator light
8. AUTO button
9. PROG button
10. OFF button
3
How to Use
This product is for household use only.
GETTING STARTED
1. Remove all stickers, packing material, and literature.
2. Wash the carafe, carafe lid and brew basket in warm sudsy water—rinse thoroughly.
These parts are also top rack, dishwasher safe.
CLEANING BEFORE FIRST USE
Cycle the unit once with water to help remove any sediment.
1. Open lid and pour cold water into water reservoir up to the
10-cup level mark on the water window (A). Do not overfill.
2. Close the reservoir lid.
3. Follow steps (8-10) in "Brewing Coffee" (Do not use ground
coffee or a paper filter).
A
4. When cycle is finished discard water from the carafe.
SETTING THE CLOCK
To set the current time of day:
1. Plug in the coffeemaker. The display indicates 12:00 a.m. until the time is set.
a. Press the HOUR button until you see the correct P.M. hour.
b. Press the MIN button to select the correct minutes. The clock is set and will continue
to keep correct time.
Note: Unplugging the unit will reset the clock to 12:00.
BREWING COFFEE
You do not have to set the clock or program the coffeemaker to brew coffee.
1. Open water reservoir lid.
2. Use the carafe to fill the water reservoir with cold water. Watch water window for the
desired level.
3. Close the reservoir lid.
4. Press brew basket release button to expose brew basket (B).
5. Insert a cone-shaped #4 paper filter into the brew basket.
6. Add ground coffee into filter (we recommend one heaping
tablespoon for every two cups).
7. Swing brew basket assembly closed until it snaps into place.
8. Place the carafe into the coffeemaker.
B
9. Plug in the coffeemaker.
10. Press button above the brew strength desired (STRONG/
MED/MILD) (C). A steady light illuminates above the strength
chosen indicating the coffeemaker is ON. The light remains
on until the brewing process is completed. When brewing
is completed, unit sounds a series of 3 "beeps" and the
chosen brew light flashes until the coffeemaker is turned
off or until it shuts itself off after 2 hours automatically sounding
C
4 "beeps." For delayed brewing see section "Programming the
Coffeemaker for Auto Brew."
Important: Do not swing open brew basket while brewing.
11. Replace the carafe on the "Keep Hot" plate when not serving to keep coffee hot.
Note: The coffeemaker shuts off automatically after 2 hours, or you may press the "OFF"
button to instantly turn off the coffeemaker. At any time prior to auto shutoff, pressing the
"OFF" button and then the "ON" button will reset the auto-off mode to 2 hours.
4
Tabla de contenido
