About This Handbook; Product Description - AL-KO Easy Crush MH 2800 Instrucciones De Uso

en
TRANSLATION OF THE ORIGINAL
INSTRUCTIONS FOR USE
Contents
About this handbook........................................ 14
Product description.......................................... 14
Product overview..............................................15
Technical data..................................................15
Safety instructions............................................15
Assembly.......................................................... 17
Startup.............................................................. 17
Operation..........................................................17
Maintenance and care..................................... 18
Storage............................................................. 19
Working behaviour and working technique...... 19
Disposal............................................................20
Troubleshooting................................................20
EU declaration of conformity............................21
Warranty........................................................... 21

ABOUT THIS HANDBOOK

Read this documentation before starting up
the machine. This is a precondition for safe
working and flawless operation.
Observe the safety warnings in this docu-
mentation and on the product.
This documentation is a permanent integral
part of the product described and must be
passed on to the new owner if the product is
sold.
Explanation of symbols
CAUTION!
Following these safety warnings care-
fully can prevent personal injury and/or
material damage.
Special instructions for greater ease of
understanding and improved handling.

PRODUCT DESCRIPTION

This documentation describes a blade shredder.
14
Translation of the original instructions for use
Symbols on the machine
Important! Take particular care during
handling.
Before taking into operation, read the in-
structions for use.
Important - danger! Keep your hands and
feet away from the blade system!
Keep your hands away from the blade
system.
Keep third parties out of the danger area!
Keep distance to the danger area.
Always disconnect the machine from the
mains before maintenance or if the cable
is damaged or cut.
Wear protective glasses and ear defen-
ders.
Wear gloves.
Safety and protective equipment
DANGER!
Danger of injury if the safety devices are
tampered with!
Tampering with safety devices can result
in serious injuries!
Do not deactivate safety and protective
devices.
Hopper concept
The hopper opening was designed according to
the standard to prevent reaching inside.
Motor protection switch
The motor protection switch disconnects in the
case of overload. Hereby, switch (6/3) pops out
of the control panel. The switch can be pushed
back in again after a cooling-down phase of ap-
prox. 5 minutes, and the machine can be switched
on. If the switch does not remain by itself in the
pressed position, extend the cooling-down phase.
If the problem continues to exist, take the machine
to a specialist workshop.
Restarting protection
For your safety, the machine is fitted with a 0-
voltage switch, which automatically switches the
machine off in the case of a power interruption.
Easy Crush MH 2800