Tabla de contenido
Idiomas disponibles
Idiomas disponibles
UK
mantled and with proof of purchase
and guarantee.
Repair service
•
Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our ser-
vice center will be glad to provide you
with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
Note: In case of complaint or service,
•
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
•
Defective units returned to us will be
disposed of for free.
Technical Data
Hedge Trimmer ............... EHS 710-69 R
Input voltage rating ..... 230-240 V~, 50 Hz
Input powe ...................................... 710 W
Safety class ........................................
Degree of protection .......................... IP20
Idling rotation speed .................. 1700 rpm
Weight ............................................3.7 kg
Cutting length .............................. 614 mm
Cutting capacity ............................. 24 mm
Acoustic power level (L
guaranteed ............................... 103 dB(A)
measured ........98.3 dB(A); K
Sound pressure level
(L
) ................. 78.3 dB (A); K
pA
Vibration at the
handle (a
) .............2.46 m/s
n
112
II
)
wA
=3.0 dB(A)
wA
=3.0 dB(A)
pA
; K
=1.5 m/s
2
n
Noise and vibration values have been de-
termined according to the standards and
regulations named in the declaration of
conformity.
Technical and optical alterations may be
made without notice for the purposes of
improvement. No guarantee can be given
for the accuracy of dimensions, notices
and specifications stated in this manual.
The manufacturer shall therefore not ac-
cept liability for statutory claims arising
from the manual.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).
2
Capítulos
Tabla de contenido
