Secure Refrigerator To Furniture; Connect Water Supply - Dacor DYF42SBI Serie Instrucciones De Instalación

Secure refrigerator to furniture

Whenever possible, perform this step for anti-tip security.
Drive Screws Through
Case Trim Into Adjacent
Cabinets.

Connect water supply

Check to make sure that Master Power Switch is in the "O" (OFF) position.
Ferrule
Compression Nut
TBI_Dacor_Installation_DA68-03583A-03_EN.indd 25
Raise Grille Panel
to Stop Position.
Compression Nut
Sleeve
Compression fitting
The refrigerator must be secured to
prevent tipping.
• Raise the grille panel to access case
trim.
• Drive a screw through the trim and into
the adjacent FURNITURE using holes
provided.
• Follow the same procedure on the
opposite side.
Connect a hose from refrigerator and
water line, installed to water pipe like
above figure.
• Turn on the water to check for leaks.
NOTE
Make sure excess tubing length does not
interfere with kickplate installation.
English 25
2020-10-15 10:39:36