Prolonged Disuse; Instructions For Cleaning; Reminders For Cleaning; Instructions For Maintenance - Gastro BER443ECO Instalacion Uso Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28

PROLONGED DISUSE

Before any prolonged disuse of the appliance,
proceed as follows:
- Clean the appliance thoroughly.
- Rub stainless steel surfaces with a cloth soaked in
vaseline oil to create a protective film.
- Shut off and main switches upstream of
appliances.
Following prolonged disuse, proceed as follows:
- Inspect the appliance thoroughly before using it
again.
- Allow electric appliances to operate at the lowest
temperature for at least 60 minutes.
4. INSTRUCTIONS FOR
CLEANING

REMINDERS FOR CLEANING

Read
this
provides important information for
safe
installation,
maintenance of the appliance.
The manufacturer will not be liable
for any damage or injury resulting
from
failure
following rules.
Disconnect the appliance electric
supply, before carrying out any
operation.
It is essential to have the oven cleaned on a daily
basis, with the machine temperature between 40
and 50° C. Carefully clean hinges – this is very
important – to avoid any future malfunctioning, in
door opening and closing.
manual
carefully.
It
use
and
to
observing
the
Use only detergents, that are suitable for oven
cleaning; do not use these for grills, as they are
too aggressive and rich in caustic soda.
The use of any unsuitable compound can cause
oven component corrosion.
Do not clean the appliance with direct jets of
water.
5. INSTRUCTIONS FOR
MAINTENANCE
REMINDERS FOR THE MAINTENANCE
TECHNICIAN
The manufacturer will not be liable
for any damage or injury resulting
from
failure
following rules.
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-
ventilated room.
Do not obstruct any air vents or drains present on
the appliance.
Do not tamper with appliance components.
Installation and appliance maintenance must be
carried out by qualified technicians authorized by
the manufacturer, in compliance with current
safety standards and the instructions in this
manual.
COMMISSIONING
See Chapter " INSTRUCTIONS FOR MAINTENANCE
".
VENTILATED OVEN
The appliance does not heat.
Possible causes:
- Temperature thermostat defective.
- Heating elements defective.
- Safety thermostat tripped.
Heating cannot be adjusted.
Possible causes:
- Temperature thermostat defective.
14
to
observing
the
Tabla de contenido
loading

Tabla de contenido