Instructions For Use - Gastro BER443ECO Instalacion Uso Mantenimiento

Connect the appliance to an efficient ground
circuit. Connect the earth conductor to the
terminal with the symbol
terminal board.
Connect the metal structure of the appliance to
the equipotential node. Connect the conductor to
the terminal with the symbol
outside of the rear panel.
COMMISSIONING
Following installation
operations, check appliance operation.In the
event of any malfunction, consult the next
Paragraph "Troubleshooting".
ELECTRIC EQUIPMENT
Switch on the appliance as directed in the
instructions and reminders for use given in
Chapter " INSTRUCTIONS FOR USE " and check:
- the current values of each phase.
- the correct operation of the heating elements.
- The regularity that your lights are bright.
- the regularity of operation of the engine

3. INSTRUCTIONS FOR USE

REMINDERS FOR THE USER
VENTILATED OVEN
Ventilated ovens are an innovatory cooking
system for food, allowing to save considerable
time and energy, without altering food features.
Thanks to the forced hot air system, the oven
reaches the required temperature in a very short
time, thus guaranteeing even cooking results,
even under full load conditions.
USING THE APPLIANCE
Read this
provides important information for
safe installation,
maintenance of the appliance.
next to the main
placed on the
or any maintenance
manual carefully. It
use and
The manufacturer will not be liable
for any damage or injury resulting
from failure
following rules.
For after-sales
assistance centres
manufacturer and demand the use of origi-nal
spare parts.
The appliance is designed for professional use and
must be operated by trained personnel.
This equipment is designed for cooking food. It is
intended for industrial use. Any other use is to be
considered improper
The first time, the appliance has to be used under
no load conditions, at the highest temperature, to
eliminate any whatever traces of grease, due to
manufacturing.
Prior to using the appliance, it is necessary to pre-
heat the cooking chamber. This is an essential
operation and has to be carried out for at least 10
minutes, every time the oven is used.
Do not leave the appliance unattended while in
operation.
On mechanical models, by presetting the timer,
this automatically switches on the oven and its
signal light, the internal oven light and presets
food cooking time. For digital models, consult the
specific section.
On models"...U...", a pushbutton on the control
panel will allow water supply, to increase degree
of humidity.
In the event of an appliance fault or malfunction
switch the appliance off at the main switch
installed upline.
Clean the appliance following the instructions
given in Chapter
CLEANING".
Do not store flammable materials in
close proximity to the appliance. FIRE
HAZARD.
Do not obstruct any air vents or drains present on
the appliance.
Do not tamper with appliance components.
Keep this manual in a safe place, known to all
users, so that it can be consulted throughout the
working life of the appliance.
Installation and appliance maintenance must be
carried out by qualified technicians authorized by
the manufacturer, in compliance with current
safety standards and the instructions in this
manual.
13
to observing
service, contact technical
authorized by
" INSTRUCTIONS
the
the
FOR